Indesit SH09PGWAX Instrukcja Obsługi Strona 9

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 8
GB
9
! The position of the corresponding gas burner or
electric hotplate* is shown on every knob.
Gas burners
Each burner can be adjusted to one of the following
settings using the corresponding control knob:
0 Off
Maximum
Minimum
To light one of the burners, hold a lit match or lighter
near the burner and, at the same time, press down
and turn the corresponding knob anti-clockwise to the
maximum setting.
Since the burner is fitted with a safety device, the
knob should be pressed for approximately 2-3
seconds to allow the automatic device keeping the
flame alight to heat up.
When using models with an ignition button, light the
desired burner pressing down the corresponding knob
as far as possible and turning it anticlockwise
towards the maximum setting.
! Note When there is no electricity supply, the
burners can be lit with a match after turning the
control knob to the flame position.
To turn on one of the burners, place a lighted match
or lighter near the burner, press the knob all the way
in and turn it anti-clockwise to the "High" setting.
! If a flame is accidentally extinguished, turn off the
control knob and wait for at least 1 minute before
trying to relight it.
To switch off the burner, turn the knob in a clockwise
direction until it stops (when reaches the “0” position).
The “separate double flame” burner*
This burner consists of two concentric burners which
can operate either together or separately.
Use of the double flame on the maximum setting
gives a very high power which reduces cooking times
with respect to conventional burners.
Moreover the double flame crown provides a more
uniform distribution of heat on the bottom of the pan,
when using both burners on minimum.
To ensure that the double-flame burner is used toTo ensure that the double-flame burner is used to
To ensure that the double-flame burner is used toTo ensure that the double-flame burner is used to
To ensure that the double-flame burner is used to
its full potential, never set the inside ring to mini-its full potential, never set the inside ring to mini-
its full potential, never set the inside ring to mini-its full potential, never set the inside ring to mini-
its full potential, never set the inside ring to mini-
mum and the outside ring to maximum at themum and the outside ring to maximum at the
mum and the outside ring to maximum at themum and the outside ring to maximum at the
mum and the outside ring to maximum at the
same time.same time.
same time.same time.
same time.
Pots and pans of all sizes can be used. In the case
of the smaller pots and pans we recommend the use
of only the internal burner.
There is a separate control knob for each of the
“separate double flame” burners.
The knob
marked
by the symbol
operates the
external burner;
The knob
marked
by the symbol
operates the
internal burner.
To turn on one of the rings, press the relative knob in
all the way and turn it anti-clockwise to the high
setting. The burner is fitted with an electronic igniter
that automatically starts when the knob is pressed
in.
Since the burner is equipped with a safetySince the burner is equipped with a safety
Since the burner is equipped with a safetySince the burner is equipped with a safety
Since the burner is equipped with a safety
device, device,
device, device,
device, after lighting the burner keep the knob
pressed in for about 2-3 seconds to allow the device
which keeps the flame lit automatically to heat up.
The selected burner can be regulated using the
corresponding knob, as follows:
0 Off
Maximum
Minimum
To switch off the burner, turn the knob in a clockwise
direction until it stops (when reaches the “0” position).
Practical advice on using the burners
To ensure the burners operate efficiently:
Use appropriate cookware for each burner (see
table) so that the flames do not extend beyond
the bottom of the cookware.
Always use cookware with a flat base and a
cover.
When the contents of the pan reach boiling point,
turn the knob to minimum.
Burner
ø Cookware diameter
(cm)
B. Semi Fast 16 - 22
A. Auxilliary 10 - 14
C. Semi-Fishburner 16 - 22
I. Double flame (DCDR
internal)
10 -14
I. Double flame (DCDR
external)
26 - 28
! Make sure the pans do not overlap the edges of
the hob while it is being used
! On the models supplied with a reducer shelf,
remember that this should be used only for the
Double flame internal (DCDR internal) burner when
you use casserole dishes with a diameter under 12
cm.
Start-up and use
Przeglądanie stron 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Komentarze do niniejszej Instrukcji

Brak uwag