
GB
19
In the case of the Mini WOK burner, use a
spanner with a 7 mm opening to unscrew the
3. Reassemble the parts following the above procedure in the reverse order.
indicating the new type of gas used. Sticker are available from any of our
Service Centres.
2. Remove the knob and adjust the adjustment screw, which is positioned
5. Once the adjustment has been made, replace the seals on the by-passes
using sealing wax or a similar substance.
!
fastened as tightly as possible.
!
indicating the new type of gas used. Stickers are available from any of our
Service Centres.
! Should the gas pressure used be different (or vary slightly) from the
inlet pipe (in order to comply with current national regulations).
Electrical
connections
DATA PLATE
see data plate
This appliance conforms to the following
European Economic Community directives:
- 2006/95/EEC dated 12/12/06 (Low
Voltage) and subsequent amendments
- 2004/108/EEC dated 15/12/04
(Electromagnetic Compatibility) and
subsequent amendments
- 93/68/EEC dated 22/07/93 and
subsequent amendments.
- 2009/142/EEC dated 30/11/09 (Gas) and
subsequent amendments.
- 2012/19/EC and subsequent
amendments.
Komentarze do niniejszej Instrukcji